Applications & Products
Applications
- Increase production rates in already flowing wells
- Produce wells that will not flow naturally
- Unload or kick-off a well that will later flow naturally
- Prevent liquid loading by changing the flow regime
- Back flow water-injection wells
- Clean up perforations prior to alternate ALS installation
Advantages
- Operating expenses are relatively low compared to other ALS
- Can be run in wells with high deviation
- Performs well with solids and oil API > 16 deg.
- Simulates most wells’ natural way of producing
Products
Injection Pressure Operated Valve (IPO)
Advantages
- 100% manufactured and tested in US
- 3-Ply Monel bellows with SS housing
- Tubing retrievable valves available in 1 1/2 in, 1.0 in and 5/8.
- Tungsten carbide or Monel Seats available in all port sizes (8/64in -32/64in)
- Standard or sour service
Check Valves
Well Applications
From wells in the beginning stages of liquid loading up to a conventional plunger application. High gas / high liquid to low gas / low liquid wells.
Advantages
- Tubing retrievable velocity check available in 1-1/2, 1.0, 5/8
- Standard or sour service
- Resilient metal-to-metal seal
Tubing Retrievable Mandrel
The mandrel is fitted with a gas lift valve and installed in the tubing string.
Advantages
EP-2 Coating; Baked epoxy finish
- Available in 2-3/8, 2-7/8 and 3-1/2
Additional Gas Lift Accessories
Depending on the well specific requirements, the following accessessories may be requried to complete a successfull gas lift set up and install.
- Pump-out Plugs
- Nipples
- Collars
- Bevelled Collars
- Bull Plugs
- Cross-Overs
- Swivel Subs
- Shear Subs
- Sliding Sleeves
- Pup Joints / Perforated Subs
- Ceramic Disk (single or dual)
- Wireline Re-Entry Guides