Wellsite Regulatory
AER and OGC Regulatory and Compliancy Testing
D-13 Suspended Wellsite Inspections
Definitive Optimization can help you meet your regulatory compliance and corporate responsibilities with our Suspended Well Inspection program. We take our experienced oil and gas operations personnel, and conduct Low and Medium Risk Suspended Well Inspections to meet AER and OGC requirements.
Definitive Optimization has developed a unique reporting platform that will maintain your records in a safe and easy to access database. Your records can also be made available in our “Customer Data” section of our web site or delivered in a hard copy format or other electronic method of your choosing.
Gas Migration Testing
This piece of mind test for the producer that their well-bore pipe is not leaking. If gone undetected these leaks are very expensive to repair and clean up. The Definitive test follows all regulations and requirements of the AER and OGC.
Surface Casing Vent Testing
- Complete test of surface casing leak including bubble test
- Flow rate and buildup with PD meter and digital pressure tranducer
- All results recorded and completed on the AER and OGC forms can be submitted on producers behalf
- Wellhead seal test can be done at the time of the surface casing vent test thus eliminating why bubble test failed
- Directive 13 compliant ensure all vents are 24″ above ground
- Calibrate the pop valve on surface casing riser to ensure surface casing is not over pressured
Click here to view Definitive Opt Sample SCVF Report
Wellhead Seal Testing
This test can be part of the suspended well inspection and along with the surface casing vent test to eliminate the wellhead as the possible leak . Definitive offers the test to all the producers when performing inspection services.
Packer Isolation Testing
- Test to check integrity of packer
- Digital Pressure and digital dead weight gauge used to ensure highest accuracy possible
- All results completed and recorded on the AER and OGC forms and submitted on producers behalf
- Case 1, 2, 3, AER & OCG Packer isolation tests
- Pressure unit is CSA and TDG compliant
Click here to view Sample Packer Isolation Report – Def Opt
Offset Frac Monitoring
Offset Frac Monitoring is a service utilized to monitoring communication between wells during fracing. Companies are able to record information in cases where a reservoir is damaged during the frac, and can satisfy AER Directive 83 to ensure wellhead safety. Offset frac monitoring controls cost overruns to repair producing wells damaged by inter-wellbore communication and build previously unknown reservoir knowledge.
Click here to view PDF Definitive Opt DFIT Monitoring Report
